The Tire Tank Float Valve kit (with 12" nipple) is a great and easy way to plumb your livestock tire tank. The Tire Tank float kit screws into the inside of the tire tank.
 
OHHHH!!!!! Before you Keep Reading........ IT IS OK TO BE EXCITED THAT YOU WONT BE CHOPPING ICE IN YOUR WATER TROUGH ANYMORE!!!! YES!!! THEY ARE DESIGNED TO BE LEFT ON (YEAR AROUND) :)
 
(OUR ICE PREVENTION OPTION COMES WITH EVERYTHING YOU NEED TO STOP CHOPPING ICE.) THEY ARE ALL HAND BUILT AT OUR RANCH HERE IN TEXAS AND ASSEMBLED 99% PRIOR TO SHIPPING! THE ICE PREVENTION WILL COME WITH "ADDITIONAL" BRASS FITTINGS NEEDED AND A GALVANIZED T. THIS T WILL BE OUTFITTED WITH AN INTERNAL 1/8" POLY LINE THAT IS BEHIND YOUR INCLUDED FREEZE MISER, THIS PREVENTS YOUR 3/4" RISER PIPE AND WATERHOSE FROM FREEZING. IT ALSO INCLUDES THE AUTOMATIC ICE SWEEPER INSTALLED WITH NOZZLE OF YOUR CHOICE. (READ BELOW ON NOZZLE CHOICES)
 
* Our Ice Prevention Setup requires No Batteries & No Electricity! The Ice Sweeper turns on WHEN THE WATER TEMPERATURE IS APPROXIMATELY 39-41 degrees and turns off at 42 degrees (Automatically). It is a thermal sensing valve that is constantly in contact with the water and releases enough water to prevent surface ice, as the water temperature dictates. No more – no less! It will keep water open in your Stock Tank to allow animals access during colder months! A Minimum of 8-10 PSI is IDEAL for the Automatic thermal valves to operate properly. 
We recommend diverting the overflow of the water a few feet away from your Stock Tank to prevent Ice buildup around your Stock Tank when the Ice Sweeper is in operation during colder months. (OUR RISER PIPE KITS ARE GREAT FOR THIS) SIMPLY DRILL A HOLE IN YOUR TROUGH AND ADD IT!) THEY WORK GREAT!!
 
SMALL NOZZLE / 1000 Gallons (or less) we recommend the ( .063 Nozzle) 
 
LARGE NOZZLE (BLACK HOSE)/ 1000 Gallons (or more) we recommend the ( .080 Nozzle)
IF YOU ARE ON LOW GRAVITY FLOW WE RECCOMEND THIS OPTION UPON SELECTION
 
**** IF you find the AUTOMATIC flow (too much) you can add a 1/4" brass ball valve to your order from our PARTS page and control the flow yourself by adding it to your ICE SWEEPER.
 
 
-Made in the USA (HAND BUILT RIGHT HERE AT OUR TEXAS RANCH)
-Durable and long lasting
-Good for flow up to 75 PSI
-Rubber wash can be replaced 
 
Shipping calculated at checkout.
 
 
Returns 

If you place an order and cancel the order within 30 minutes, you will receive a full refund. After this timeframe there are no guarantees that the product will not be packaged and shipped to you. If it is shipped and you cancel you will be responsible for shipping charges both ways and any credit card fees. If you receive a product and it is damaged or defective, we will exchange it after receiving pictures of damages within 24-48 hours of delivery. There will be absolutely no exchanges or refunds after products have been in the water, as water causes wear and we cannot resell them. All other returns must be approved before sending back.
 
Please reach us via email at stocktanksolutions@gmail.com